Forklift Safety Checklist "*" indicates required fields Client's Email* Inspection Performed By* Unit #* Operational Hours* Visual ChecksDAMAGE - Bent, dented or broken parts* OK Repair LEAKS – Fuel, oil, radiator, hydraulics* OK Repair FORKS – Secure, not bent, cracked or badly worn* OK Repair TIRES & WHEELS – Drive wheels, steer wheels, load wheels, casters, etc* OK Repair CHAINS, CABLES & HOSES – In place* OK Repair BATTERY – Battery cable and connector condition, cable routing (not outside of truck), battery retainer securely in place* OK Repair GUARDS – All guards in place and condition: overhead, load backrest, etc; gates and side rails (SP & Turret Models)* OK Repair MECHANICAL SAFETY DEVICES – Operator harness or seat belt, fire extinguisher, name/data plate, warning labels, etc. in good condition* OK Repair OPERATOR COMPARTMENT/CONTROLS – All controls, steer tiller, pedals, etc. in good condition; seat locks in position* OK Repair Operational ChecksPOWER UP – Turn on key; all indicator lights and alarms are working* OK Repair ELECTRICAL SAFETY DEVICES – Horn, audible signals, entry bar, flashing lights, indicator lights, etc. work properly* OK Repair POWER DISCONNECT – Cuts off all electrical power* OK Repair STEERING – No binding, no excessive play* OK Repair BRAKES & TRAVEL CONTROLS – Check braking and plugging distances while traveling slowly at first; if ok, check at higher speeds; acceleration smooth, not jerky* OK Repair PARKING BRAKE – Seat, hand or foot* OK Repair HYDRAULIC CONTROLS – Test all hydraulic functions for smooth and proper operation and no unusual noise* OK Repair ATTACHMENTS – Function properly, no unusual noise, securely in place especially removable attachments* OK Repair LIMIT SWITCHES – Travel limit, lift limit, tilt limit, safety reverse (walkies), etc* OK Repair BATTERY CHARGE – Discharge meter in full green or 75% charge after raising forks.* OK Repair CommentsItems needing repair or adjustmentCaution – If the truck is found to be in need of repair or in any way unsafe, or contributes to an unsafe condition, the matter shall be reported immediately to the designated authority, and the truck shall not be operated until it has been restored to a safe operating condition. If during operation, the truck becomes unsafe in any way, the matter shall be reported immediately to the designated authority, and the truck shall not be operated until it has been restored to safe operating condition. Do not make repairs or adjustments unless specifically authorized to do so. Signature* Reset signature Signature locked. Reset to sign again Thank you for choosing McQuaid property management. If any concerns or repairs arise please call our office and do not operate the unit until repairs are made. These reports are not read by MPM and it is the responsibility of the operator to properly report any issue to a supervisor or McQuaids. (902) 894-3817